Loading Letterhead - Lexmark T656 User Manual

Additional printer setup
Slide the paper gently into the multipurpose feeder until it comes to a
stop, and then adjust the width guide to lightly touch the edge of the
paper stack.

Loading letterhead

In the 250‑ or 550‑sheet trays
Without an optional StapleSmart
Single‑sided printing
TM
II Finisher
Notes:
• Make sure the paper fits loosely in the
multipurpose feeder, lies flat, and is not
bent or wrinkled.
•
Do not exceed the maximum stack height by
forcing paper under the stack height limiter.
•
Load only one size and type of media at a
time.
•
Load envelopes with the flap side down and
to the left as shown on the tray.
Warning—Potential Damage: Never use
envelopes with stamps, clasps, snaps, windows,
coated linings, or self‑stick adhesives. These
envelopes may severely damage the printer.
With an optional StapleSmart II Finisher
Single‑sided printing
37