Remove Paper From All Bins; Remove Paper From Standard Output Bin - Lexmark T656 User Manual

Understanding printer messages
3
Remove the specified bins.
4
Contact Customer Support.
•
Touch Continue to clear the message and print without using the specified bins.
Remote Management Active DO NOT POWER OFF
The printer settings are being configured. Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer power off while Remote Management Active appears
on the display.
Remove packaging material, check <x>
Remove any remaining packaging material from the specified location.

Remove paper from all bins

Remove the paper from all of the bins. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Remove paper from bin <x>
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.
Remove paper from <linked bin set name>
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Replace wiper
Replace the fuser wiper, or try one or more of the following:
•
Touch Continue to clear the message and continue printing.
• Touch Ignore to clear the message, but at the next power-on, the message appears again.
Resetting active bin
Wait for the message to clear.
152