Loading Paper And Specialty Media - Lexmark MS531 User Manual

Set up, install, and configure
For more information on navigating a magnified screen, see
25.
Adjusting the Voice Guidance speech rate
1
From the home screen, touch Settings > Device > Accessibility > Speech Rate.
2
Select the speech rate.
Adjusting the default headphone volume
1
From the home screen, touch Settings > Device > Accessibility.
2
Adjust the headphone volume.
Note: The volume resets to the default value after the user exits Accessibility mode or when the printer
wakes from Sleep or Hibernate mode.
Adjusting the default internal speaker volume
1
From the home screen, touch
2
Adjust the volume.
Notes:
•
If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer
performance.
•
The volume resets to the default value after the user exits Accessibility mode or when the printer wakes
from Sleep or Hibernate mode.
Enabling spoken passwords or personal identification numbers
1
From the home screen, touch Settings > Device > Accessibility > Speak Passwords/PINs.
2
Enable the setting.

Loading paper and specialty media

Setting the paper size and type
1
From the home screen, touch Settings > Paper > Tray Configuration > Paper Size/Type > select a paper
source.
2
Set the paper size and type.
.
"Navigating the screen using gestures" on page
27