Standard Network Software Error - Lexmark T656 User Manual

Understanding printer messages
54 Network <x> software error
<x> is the number of the network connection.
Try one or more of the following:
•
Touch Continue to continue printing.
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
54 Serial option <x> error
<x> is the number of the serial option.
Try one or more of the following:
•
Check that the serial cable is connected correctly and is the proper one for the serial port.
•
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and host computer.
•
Touch Continue to continue printing.
• Turn the printer power off and then back on to reset the printer.

54 Standard network software error

Try one or more of the following:
• Touch Continue to continue printing.
•
Turn the printer off and then back on to reset the printer.
• Upgrade (flash) the network firmware in the printer or print server.
55 Unsupported option in slot <x>
<x> is a slot on the printer system board.
Try one or more of the following:
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the unsupported option card from the printer system board.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
158