Common Printer Messages; Operator Panel Menus; Canceling A Print Job; Printing A Menu Settings Page - Lexmark C510 Quick Reference

Loading a tray
Width guide
Length guide
Load media into any of the standard or optional trays. All trays are loaded the same
way.
1 Remove the tray.
2 If you are loading an optional legal tray, open the cover.
3 Squeeze the length guide tabs together as shown, and slide the guide to the
correct position for the size media you are loading.
4 Squeeze the width guide tabs together as shown, and slide the guide to the
correct position for the size media you are loading.
5 Place the media into the tray with the recommended print side faceup for one-
sided printing and facedown for two-sided printing. Do not load media above
the load line.
6 If you are loading an optional legal tray, close the cover.
7 Re-insert the tray.

Loading letterhead

Letterhead must be loaded differently, depending on what options you have
installed.
One-sided Two-sided
printing printing
(any tray) (any tray)

Common printer messages

Load lines
Message
Change Tray x
The printer is requesting
a different size or type of
media than what is
loaded.
Waiting
The printer has received
data to print, but is
Paper size
waiting for a command
indicators
or additional data.
Not Ready
The printer is not ready
to process data.
Flushing Buffer
The printer is discarding
the current print job.

Canceling a print job

To cancel a print job after it has started printing:
1 Press Menu until you see Job Menu, and then press Select.
2 Press Menu until you see Cancel Job, and then press Select.

Printing a menu settings page

To verify Paper Size and Paper Type settings, and check installed options and
memory, print a menu settings page:
1 Press Menu until you see Utilities Menu, and then press Select.
2 Press Menu until you see Print Menus, and then press Select. The menu
settings page prints.
Actions
• Remove the currently loaded media from
the specified tray, and then load the
requested media.
• Press Select to clear the message and
print on the media currently loaded in the
tray.
• Cancel the current job.
Go
• Press to print the contents of the
buffer.
• Cancel the current job.
Press Go to ready the printer to receive
jobs.
• Wait for the message to clear.
• Sometimes this message means the
driver data did not match what the printer
was expecting. If the situation recurs, try
printing from another printer driver.

Operator panel menus

Supplies Menu Color Menu
Paper Menu
<color> Toner Print Mode Paper Source
Waste Bottle
Color Correction Paper Size
Photodev Cart Toner Darkness
Paper Type
Fuser Color Saver Custom Types
Supplies Life Color Balance Universal Setup
Replace Supplies
Color Samples Substitute Size
Manual Color Paper Weight
Paper Loading
PCL Emul Menu
Setup Menu Job Menu
Font Source Printer Language
Cancel Job
Font Name Power Saver Confidential Job
Point Size Resource Save Held Jobs
Pitch
Download Target Reset Printer
Symbol Set Print Timeout
Print Buffer
Orientation Wait Timeout
Abort Restore
Lines per Page Auto Continue
A4 Width
Jam Recovery
Tray Renumber
Page Protect
Auto CR after LF Display Language
Auto LF after CR Alarm Control
Toner Alarm
Job Accounting
PostScript Menu
Serial Menu
Parallel Menu
Print PS Error PCL SmartSwitch
PCL SmartSwitch
Font Priority PS SmartSwitch
PS SmartSwitch
Image Smoothing
NPA Mode
NPA Mode
PDF Menu Serial Buffer
Parallel Buffer
Job Buffering
Job Buffering
RS-232/ RS-422
Advanced Status
RS-422 Polarity
Protocol
Serial Protocol
Honor Init
Robust XON
Parallel Mode 1
Baud
Parallel Mode 2
Data Bits
MAC Binary PS
Parity
Honor DSR
Help Menu
Print All
Help Guide
Printing Guide
Supplies Guide
Print Quality
Color Quality
Media Guide
Connection Guide
Moving Guide
Print Defects
Jam Clearance
© 2003 Lexmark International, Inc. All rights reserved.
P/N 20K1046
E.C. 2K0125
Finishing Menu
Duplex
Duplex Bind
Copies
Blank Pages
Collation
Separator Sheets
Separator Source
Multipage Print
Multipage Order
Multipage View
Multipage Border
Utilities Menu
Print Menus
Print Net Setup
Print Net <x> Setup
Print Fonts
Print Directory
Factory Defaults
Remove Held Jobs
Format Flash
Defragment Flash
Format Disk
Job Acct Stat
Hex Trace
Coverage Est.
Network Menu
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Network Buffer
Job Buffering
MAC Binary PS
Std Net Setup
Network <x> Setup
USB Menu
PCL SmartSwitch
PS SmartSwitch
NPA Mode
USB Buffer
Job Buffering
MAC Binary PS
Printed in U.S.A.
8/03