Lexmark T656 User Manual page 129

Understanding printer menus
Menu item
Timeouts
Print Timeout
Disabled
1–255
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Job Hold Timeout
Disabled
5–255
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
Description
Sets the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the remainder of the print job
Notes:
• 90 seconds is the factory default setting.
• When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
•
Print Timeout is available only when using PCL or PPDS
emulation. This setting has no effect on PostScript emulation
print jobs.
Sets the amount of time in seconds the printer waits for additional
data before canceling a print job
Notes:
•
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL or
PPDS emulation print jobs.
Sets the amount of time the printer waits for user intervention
before it holds jobs that require unavailable resources and continues
to print other jobs in the print queue
Notes:
•
30 seconds is the factory default setting.
• This menu item appears only when a printer hard disk is
installed.
Lets the printer automatically continue printing from certain offline
situations when not resolved within the specified time period
Notes:
•
Disabled is the factory default setting.
•
5–255 is a range of time in seconds.
Specifies whether the printer reprints jammed pages
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the pages
is needed for other printer tasks.
• On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
129