Lexmark T656 User Manual page 128

Understanding printer menus
Menu item
Output Lighting
Standard Bin LED
Normal/Standby Mode
Off
Dim
Bright
Power Saver
Off
Dim
Bright
Web Page Refresh Rate
30–300
Contact Name
Location
Alarms
Alarm Control
Cartridge Alarm
Staple Alarm
Timeouts
Standby Mode
Disabled
2–240
Timeouts
Power Saver Mode
Disabled
1–240
Timeouts
Screen Timeout
15–300
Description
Sets the amount of light from the standard bin or an optional output
bin
Notes:
• Dim is the factory default setting if Eco‑Mode is set to Energy
or Energy/Paper.
• Bright is the factory default setting if Eco‑Mode is set to Off or
Paper.
Specifies the number of seconds between Embedded Web Server
refreshes
Note: 120 seconds is the factory default setting.
Specifies a contact name for the printer
Specifies the location of the printer
Note: The location will be stored on the Embedded Web Server.
Sets an alarm to sound when the printer requires operator
intervention
Available selections for each alarm type are:
Off
Single
Continuous
Notes:
•
Single is the factory default setting for Alarm Control. Single
sounds three quick beeps.
•
Off is the factory default setting for Toner Alarm. Off means
no alarm will sound.
Specifies the number of minutes of inactivity before the system
enters a lower power state
Note: 15 minutes is the factory default setting.
Specifies the number of minutes of inactivity before some systems
begin entering a minimum power state.
Notes:
•
30 minutes is the factory default setting.
•
Power Saver does not interact with Standby Mode.
Sets the amount of time in seconds the printer waits before returning
the printer display to a Ready state
Note: 30 seconds is the factory default setting.
128