Security Audit Log Menu; Set Date And Time Menu - Lexmark T656 User Manual

Understanding printer menus

Security Audit Log menu

Menu item
Export Log
Delete Log
Delete now
Do not delete
Configure Log
Enable Audit
Enable Remote Syslog
Remote Syslog Facility
Severity of events to log

Set Date and Time menu

Menu item
Current Date and Time
Manually Set Date and Time
<input date/time>
Time Zone
<list of time zones>
Automatically observe DST
On
Off
Custom Time Zone Setup
Enable NTP
On
Off
NTP Server
Enable Authentication
On
Off
Description
Enables an authorized user to export the security log
Notes:
• To export the log from the printer control panel, a flash drive must be
attached to the printer.
• From the Embedded Web Server, the log can be downloaded to a computer.
Specifies whether audit logs are deleted
Note: Delete Now is the factory default setting.
Determines whether and how the audit logs are created as well as what will be
included in the audit logs
Note: Factory default settings enable the security audit log.
Description
Shows the current date and time settings for the printer
Notes:
•
Date and Time is set in YYYY-MM-DD HH:MM format.
• Manually setting the date and time changes the Enable NTP setting to No.
Note: GMT is the factory default setting.
Note: On is the factory default setting and uses the applicable Daylight Saving Time
associated with the Time Zone setting.
Specifies a custom time zone
Enables Network Time Protocol, which synchronizes the clocks of devices on a
network
Notes:
•
On is the factory default setting.
•
The setting will turn to Off if you manually set the date and time.
Specifies the NTP Server Address
Note: Off is the factory default setting.
123