Security Audit Log Menu; Set Date And Time Menu - Lexmark CS417 User Manual

Understanding the printer menus
Use
Wiping Mode
Auto
Automatic Method
Single pass
Multiple pass

Security Audit Log menu

Use
Export Log
Delete Log
Yes
No
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of Events to Log
0–7

Set Date and Time menu

Use
Current Date and Time
To
Specify the mode for erasing temporary data files.
Mark all disk space used by a previous print job. This method does not permit
the file system to reuse this space until it has been cleared.
Notes:
•
"Single pass" is the factory default setting.
•
Only automatic wiping enables users to erase temporary data files
without having to turn off the printer for an extended amount of time.
•
Highly confidential information should be erased using only the Multiple
pass method.
To
Let an authorized user export the audit log.
Notes:
•
To export the audit log from the printer control panel, attach a flash drive
to the printer.
•
The audit log can be downloaded from the Embedded Web Server and
saved on a computer.
Specify whether or not audit logs are deleted.
Note: Yes is the factory default setting.
Specify how and whether or not audit logs are created.
Notes:
•
Enable Audit determines if events are recorded in the secure audit log
and remote syslog. No is the factory default setting.
•
Enable Remote Syslog determines if logs are sent to a remote server. No
is the factory default setting.
•
Remote Syslog Facility determines the value used to send logs to the
remote syslog server. 4 is the factory default setting.
•
If the security audit log is activated, then the severity value of each event
is recorded. 4 is the factory default setting.
To
View the current date and time settings for the printer.
79