Fog - Epson WorkForce AL-M200DN User Manual

Problem
The printed result has ghosting.
Note:
If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

Fog

Action
The print media surface may be uneven. Try changing the Paper Type setting in the
print driver. For example, change Plain to Lightweight Cardstock.
1. On the Paper/Output tab for Printing Preferences of the print driver, change
the Paper Type setting.
Adjust the transfer bias.
1. Launch the Printer Setting Utility, click Adjust BTR on the Printer Maintenance
tab.
2. Adjust the setting for the type of print media being used.
3. Click the Apply New Settings button.
Adjust the temperature of the fusing unit.
1. Launch the Printer Setting Utility, and click Adjust Fusing Unit on the Printer
Maintenance tab.
2. Adjust the fixing temperature by turning up the value for your printing media.
3. Click the Apply New Settings button.
If you use non-recommended print media, use the print media recommended for
the printer.
AL-M200 Series User's Guide
Troubleshooting 196