Epson WorkForce AL-M200DN User Manual page 147

WPS Setup (AL-M200DW only)
Push Button
Control
PIN Code
*
Factory default menu setting
Note:
This menu item appears only when the printer is connected to a wireless network.
Reset Wi-Fi (AL-M200DW only)
Purpose:
To initialize wireless network settings. Enabling this feature and rebooting the printer will reset all the
wireless settings to their factory default settings.
Values:
*
No
Yes
*
Factory default menu setting
Note:
This menu item appears only when the printer is connected to a wireless network.
TCP/IP
Purpose:
To configure TCP/IP settings. To make any changes effective, turn off the printer and then turn it back
on.
Values:
IP Mode
Dual Stack
IPv4
PBC Start
Cancel
Start
Start Configuration Starts configuring wireless network settings using the PIN code assigned
automatically by the printer.
Print PIN Code Prints the PIN code to be entered on the computer for the WPS encryption
setup.
Does not reset the wireless setting.
Resets the wireless setting.
*
*
Disables the PBC method for the WPS encryption.
Enables the PBC method for the WPS encryption.
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Using the Operator Panel Menus
AL-M200 Series User's Guide
147