Epson WorkForce AL-M200DN User Manual page 46

A confirmation window appears.
16. Click Yes.
17. Wait a few minutes until the printer restarts to establish a wireless network connection and the
Configuration Complete screen appears.
18. Click Print Printer Setting.
19. Confirm that "Link Quality" is shown as "Good", "Acceptable", or "Low" on the report.
Note:
When "Link Quality" is shown as "No Reception", check if the wireless network settings are correctly
configured. To reconfigure the wireless network settings, click Next on the Configuration
Complete screen and then click Return.
20. Click Next.
21. Follow the on-screen instructions until the Check Setup screen appears.
22. Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
AL-M200 Series
Printer Connection and Software Installation
User's Guide
46