Epson WorkForce AL-M200DN User Manual page 53

Note:
When "Link Quality" is shown as "No Reception", check if the wireless network settings are correctly
configured. To reconfigure the wireless network settings, click Return.
16. Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
If you see any errors, click Trouble Shooting Guide and follow the instruction.
17. Check if the printer to be installed is listed in the Select Printer screen, and then click Next.
Note:
If the printer to be installed is not listed in the Select Printer screen, try either of the following steps:
❏ Click Refresh to update the information.
❏ Click Add Printer, and then enter the details of the printer manually.
18. Configure the required items on the Enter Printer Settings screen, and then click Next.
19. Select the software to be installed, and then click Install.
20. Click Finish to exit this tool.
The wireless configuration is complete.
AL-M200 Series
Printer Connection and Software Installation
User's Guide
53