Epson WorkForce AL-M200DN User Manual page 59

5. Configure the required items on the Enter Printer Settings screen, and then click Next.
6. Select the software to be installed, and then click Install.
7. Click Finish to exit this tool.
The wireless configuration is complete.
When EpsonNet Config operation is successful and the printer is rebooted, wireless LAN connection
is completed.
Setting Up a New Wireless Network Environment for Your Computer (When You Need to Set Up Your
Wireless Connectivity With Your Computer)
For DHCP Networks:
1. Setting up your computer for wireless connectivity:
Note:
You can also change the wireless network settings using the wireless application that may be installed
on your computer.
For Windows XP and Windows Server 2003:
a Select Network Connections from Control Panel.
b Right-click Wireless Network Connection and select Properties.
c Select the Wireless Networks tab.
d Ensure that the check box for Use Windows to configure my wireless network settings
is selected.
Note:
Make note of the wireless network settings on the Advanced dialog box (step f) and the Wireless
network properties dialog box (step h). You may require these settings later.
e Click the Advanced button.
f Select Computer-to-computer (ad hoc) networks only and close the Advanced dialog
box.
AL-M200 Series
Printer Connection and Software Installation
User's Guide
59