Fog - Epson Aculaser C1700 Series User Manual

Problem
The printed result has ghosting.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Fog

Action
Adjust the transfer bias.
1. Launch the Printer Setting Utility, and click Chart Print on the Diagnosis tab.
2. Click the Ghost Configuration Chart button.
The Ghost Configuration Chart is printed.
3. Click BTR Refresh Mode on the Printer Maintenance tab.
4. Select the check box next to On, and then click the Apply New Settings button.
5. Click Chart Print on the Diagnosis tab.
6. Click the Ghost Configuration Chart button.
The Ghost Configuration Chart is printed.
The print media surface may be uneven. Try changing the Paper Type setting in the
print driver. For example, change Plain to Lightweight Cardstock.
1. On the Paper / Output tab in Printing Preferences of the print driver, change
the Paper Type setting.
Adjust the temperature of the fusing unit.
1. Launch the Printer Setting Utility, and click Adjust Fusing Unit on the Printer
Maintenance tab.
2. Adjust the fixing temperature by turning up the value for your printing media.
3. Click the Apply New Settings button.
If you use non-recommended print media, use the print media recommended for
the printer.
Epson AcuLaser C1700 Series
Troubleshooting
User's Guide
87