Epson WorkForce AL-M200DN User Manual page 135

6. Specify the length of the short edge and long edge under Change Setting For. You can specify the
values either by entering them directly or using the up arrow and down arrow buttons. The length
of the short edge cannot be longer than the long edge, even if it is within the specified range. The
length of the long edge cannot be shorter than the short edge, even if it is within the specified
range.
7. To assign a paper name, select the Name the Paper Size check box, and then enter the name in
Paper Name. Up to 14 characters can be used for the paper name.
8. If necessary, repeat steps 5 to 7 to define another custom size.
9. Click OK twice.
Printing on Custom Size Paper
Use the following procedures to print using either the Windows or Mac OS X print driver.
Using the Windows Print Driver
This section explains the procedure using Windows 7 WordPad as an example.
Note:
The way to display the Printer Properties/Printing Preferences dialog box depends on the application
software. Refer to the manual of your application software.
1. From the file menu, select Print.
2. Select your printer and click Preferences.
3. Select the Paper/Output tab.
4. Select the size of the document to be printed from Paper Size.
5. Select the paper type to be used from Paper Type.
6. Click the Layout tab.
7. From Output Size, select the custom size you defined. If you have selected the custom size from
Paper Size in step 4, select Same as Paper Size.
8. Click OK.
AL-M200 Series User's Guide
Printing Basics 135