Epson WorkForce AL-M200DN User Manual page 112

AL-M200 Series User's Guide
❏ If envelopes are still not fed correctly, add some bending to the flap of the envelopes as shown in the
following illustration. The amount of the bending shall be 5 mm (0.20 inches) or less.
Important:
Never use envelopes with a window or coated linings as it causes paper jams that may result in damage to
the printer.
Loading Com-10, Yougata 4/6, or Younaga 3 Envelopes
Load envelopes with the print surface facing up. Ensure that the flapped edge is pointing toward the
right of the printer and each flap is folded under the envelope.
Printing Basics 112