Epson WorkForce AL-M200DN User Manual page 149

InternetServices
Bonjour(mDNS)
*1
Factory default menu setting
*2
WSD stands for Web Services on Devices.
IP Filter
Note:
The IP Filter feature is available only when Protocol is set to LPD or Port 9100.
Purpose:
To block data received from certain IP addresses through the network. You can set up to five IP
addresses. To make any changes effective, turn off the printer and then turn it back on.
Values:
No.n/Address (n is 1 - 5.)
No.n/Mask (n is 1 - 5.)
No.n/Mode (n is 1 -
5.)
*
Factory default menu setting
Initialize NVM
Purpose:
To initialize wired network data stored in Non-Volatile Memory (NVM). Enabling this feature and
rebooting the printer will reset all the wired network settings to their factory default values.
Values:
Yes
*
No
*
Factory default menu setting
Disables an access to EpsonNet Config embedded in the printer.
Disable
*1 Enables an access to EpsonNet Config embedded in the printer.
Enable
Disables the Bonjour (mDNS).
Disable
*1 Enables the Bonjour (mDNS).
Enable
Sets the IP address for Filter n.
Sets the address mask for Filter n.
*
Disables the IP Filter feature for Filter n.
Off
Reject Rejects an access from the specified IP address.
Accept Accepts an access from the specified IP address.
Initializes the wired network data stored in NVM.
Does not initialize the wired network data stored in NVM.
AL-M200 Series
Using the Operator Panel Menus
User's Guide
149