Epson WorkForce AL-M200DN User Manual page 41

Advanced Setup Through
*1
WPS-PIN (Wi-Fi ® Protected Setup-Personal Identification Number) is a method to authenticate and register devices
required for wireless configuration, by entering PIN code in the printer and computer. This setting, performed through
access point, is available only when the access points of your wireless router supports WPS.
*2
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for
wireless configuration, by pressing the button provided on the access point via wireless routers, and then performing
WPS-PBC setting on the operator panel. This setting is available only when the access point supports WPS.
Using Wizard Setup to Configure Wireless Network Settings
The following procedure uses Windows 7 as an example.
1. Insert the Software Disc into your computer's CD/DVD drive. When the AutoPlay window
appears, click Run setup.exe to start Install Navi.
2. Click Easy Install.
The SOFTWARE LICENSE AGREEMENT appears.
3. If you agree to the terms of the SOFTWARE LICENSE AGREEMENT, select Agree and then click
Next.
Ethernet connection
Operator Panel
EpsonNet Config
*1
WPS-PIN
*2
WPS-PBC
Printer Connection and Software Installation
AL-M200 Series User's Guide
41