Print Line Length Calibration - Lexmark C750 Service Manual

5060-00x
d.
To adjust L or Left value, press Go to print the Cyan Alignment Page. Use the leftmost target in the
first row to adjust the Cyan and Black vertical lines until the targets overlap.
Adjust the setting and press Go to print the page and verify the setting, until the lines are even. Press
Select to save the value.
e.
Change each of the settings (Top, Left, Right, and Theta) for Cyan. When the targets are aligned,
press Go to print the final page.
5.
After aligning the Cyan targets, press Return. Repeat the process to align the Top, Left, Right, Theta for
Magenta and for Yellow.

Print line length calibration

1.
Press Return until you reach the main Diagnostic Menu (the top line is blank and bottom line displays
Alignment).
2.
Press Menu until Print Tests is displayed and press Select.
3.
Select Prt Line Len Cal.
There are six alignment groups, A through F.
A-14
Service Manual