Lexmark C750 Service Manual page 447

3.
Holding the nip relief handle in place, use a flathead screwdriver to gently pry up on the top portion of the
lever allowing the handle to press into place onto the post using moderate force.
4.
Once the handle snaps onto the post, press the upper portion of the handle to the right and rotate the
handle into its home position.
This seats the nip relief lever into the correct position.
5.
Check for proper operation.
6.
Install the waste toner container.
7.
Replace the covers.
5060-00x
Appendix A—Service tips
A-21