Lexmark C750 Service Manual page 450

5060-00x
Step 1: Secure the printer
Completely stabilize the printer before the finisher alignment process is started. How this is done depends on
whether you have a short or tall finisher.
Short finisher
1.
Attach caster brakes (A) to the two back legs of the printer caster base.
2.
Screw the caster brakes onto the legs of the caster base.
3.
Adjust the leveling feet (B) on the caster brakes so they securely touch the floor.
Tall finisher
Adjust the four leveling feet (C) on the bottom of the 2000-sheet drawer so all four securely touch the floor.
A-24
Service Manual