Lexmark C750 Service Manual page 70

5060-00x
User primary
message
36 Printer Service
Required
37 Insufficient
Collation Area
37 Insufficient Defrag
Memory
2-36
Service Manual
User secondary
Explanation
message
This message is displayed when background toner prevents
a completion of a TPS calibration cycle. Service is required
to fix the problem.
Press Go to clear the error.
If the Service Printer message is displayed it
means that a TPS failure has most likely occurred. The
printer continues to operate but the color quality degrades.
The most probable cause for this error message is a
defective print cartridge or ITU.
This message is displayed when the printer memory and
disk used to store pages is too full to collate the print job.
The following actions can be taken:
• Press Go to clear the message and continue collating
• Press Menu> or Menu< to access the Busy/Waiting
The following functions are available using the Busy/Waiting
Menu.
• Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
Note: Menu Lockout does NOT prevent access to the Busy/
Waiting Menu.
This message is displayed when insufficient printer memory
is available to perform Flash Memory Defragment operation.
This message appears prior to the actual start of the
defragment operation.
Press Go to clear the message.
To perform the defragment operation you can:
• Delete fonts, macros and other data in RAM
• Install additional printer memory
• Press Menu> or Menu< to access the Busy/Waiting
The following functions are available using the Busy/Waiting
Menu:
• Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
Note: Menu Lockout does NOT prevent access to the Busy/
Waiting Menu.
the remaining pages of the job
or
Menu.
Menu.