Lexmark C750 Service Manual page 67

User primary User secondary
message message
Priming Failed, Retry.
GO/Stop
Insert Staple
Cartridge
Load Staples
Explanation
This message is displayed when an error has occurred
during the printer staple priming operation.
The following actions can be taken:
• Press Go to initiate the priming operation again or
• Press Return or Stop to cancel the priming operation.
Note: If no action is taken and the printer Auto Continue
setting is not disabled, the printer eventually clears the
message, the priming operation is cancelled, and the printer
resumes printing.
This message is displayed when the staple cartridge is
missing or installed incorrectly. This message can be
displayed at any of the following times, regardless of the
Staple Alarm setting.
• At POST
• After the stapler door has been closed.
The following actions can be taken:
• Install the staple cartridge
or
• Press Go to ignore this message.
The printer now handles staple jobs as if the staple unit
were installed with no staples. The Staples Empty warning
appears on the status line and Load Staples may
immediately appears.
This message is displayed when the Staples Empty Alarm is
activated and there are no staples in the staple unit or the
staple unit is not installed.
This message appears:
• Prior to printing the first page of a batch of pages that
are to be stapled
or
• During the printing of a batch of pages that are to be
stapled (if the condition cannot be detected prior to
printing the first page of the batch).
The following actions can be taken:
• A new staple cartridge may be installed to clear this
message and start/continue printing the staple batch
or
• Ignore the Load Staples request for this print job by
pressing Go or Select. The printer resumes printing,
however the print job for which stapling was selected is
not stapled
or
• Press Menu> or Menu< to access the Busy/Waiting
Menu.
The following functions are available using the Busy/Waiting
Menu:
• Cancel Job
• Reset Printer
• Reset Active Bin
• Check Supply Levels
Note: Menu Lockout does not prevent access to the Busy/
Waiting Menu.
5060-00x
2-33
Diagnostic information