Setting The Program Number - Brother BAS-705 Instruction Manual

3. PANEL OPERATION

3-2-6. Setting the program number

This procedure is used to set the program number for a sewing pattern.
The standard sewing patterns are 1 (29 stitches), 2 (36 stitches) and 3 (43 stitches).
w
AUTO MODE
Production counter
1st bobbin counter
2nd bobbin counter
ADJUSTMENT(/)
Loop/feed
X-Y/program
X-Y/test feed
X-Y/PROGRAM/(ADJ)
Program No.
X scale (%)
Y scale (%)
X-Y/PROGRAM/(ADJ)
Program No.
X scale (%)
Y scale (%)
MODE SELECT
e
x
z
WARNING
CANCEL
ENTER
t
1. Press the MODE switch w to select AUTO mode.
2. While pressing the
the MODE switch w.
* This will change the mode to ADJUSTMENT mode.
SELECT switches e to move the
3. Use the and
pointer " " so that "X-Y/program" is selected,
and then press the ENTER switch t.
4. Use the and
move the pointer "
selected.
5. While using the
cursor "-" , press the
to set the desired program number.
* If the CANCEL switch e is pressed, the old previ
ously-set program number will appear again on
the display.
6. Press the ENTER switch t.
* The new program number setting will appear on
the display.
* At this time, the feed mechanism, will move to
the sewing start position.
18
POWER
RESET
r
SELECT switche e , press
SELECT switches e again to
" so that "Program No." is
SELECT switch e to move the
and SELECT switches e
BAS-705