Loading Sewing Data; Setting The Program Number - Brother BAS-300G Basic Operation Manual

Direct drive programmable electronic pattern sewer
Hide thumbs Also See for BAS-300G:
Table of Contents

Advertisement

5-2. Loading sewing data

Refer to "5-8. Notes on handling CF cards (sold separately)" for details on using CF cards.
1
2
3
4
Loading complete
The PROGRAM No. display will change from " P" to the selected program number.
Turn off the power switch, remove the CF card, and then close the cover of the CF slot.

5-3. Setting the program number

2nd step
CF media indicator illuminates
Loading
4954Q
BAS-300G, BAS-311G, BAS-326G
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
With the power turned off, insert the CF card into the CF
slot.
NOTE:
Make sure the CF card is facing the correct way
when inserting it.
• Always be sure to keep the cover closed except
when inserting and removing the CF card. If this is
not done, dust may get inside and cause problems
with operation.
Turn on the power switch.
or
Press the
key to select the program number
(100 − 999).
* The "---" display is used to check the feed home
position.
Press the R/W key.
• The buzzer will sound and the selected sewing data
will be loaded from the CF card and copied into the
sewing machine's internal memory.
1. Press the
or
key (1) to select the program number
that is loaded into the internal memory.
The program number will flash in the PROGRAM No.
display (2).
"---" will appear at the time of shipment from the
factory. (For checking feed home position)
2. Depress the foot switch to the 2nd step.
(If using a two-pedal foot switch, lower the work clamp
before depressing the start switch.)
The feed mechanism will move to the home position
and the program number will be accepted.
The program number will stop flashing and illuminate
steadily.
NOTE:
After completing the setting, be sure to refer to "5-6.
Checking the sewing pattern" to check that the needle
drop position is correct.
4453Q
4421Q
4457Q
4498Q
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bas-311gBas-326g

Table of Contents