Preparation; Installing The Machine - Brother BAS-705 Instruction Manual

2. PREPARATION

Machine installation should only be carried
out by a qualified technician.
Contact your Brother dealer or a qualified
electrician for any electrical work that may
need to be done.
The sewing machine weighs more than 205
kg. The installation should be carried out by
two or more people.
Do not connect the power cord until installa
tion is complete, otherwise the machine may
operate if the start switch is pressed by mis
take, which could result in injury.
Be sure to connect the ground. If the ground
connection is not secure, you run the risk of
receiving a serious electric shock.

2-1. Installing the machine

q
CAUTION
Be sure to wear protective goggles and gloves
when handling the lubricating oil and grease,
so that they do not get into your eyes or onto
your skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the
grease under any circumstances, as they can
cause vomiting and diarrhoea.
Keep the oil out of the reach of children.
Avoid setting up the sewing machine near
sources of strong electrical noise such as high-
frequency welding equipment.
If this precaution is not taken, incorrect ma
chine operation may result.
1. Push the ON end of the lever q down to secure
the caster w.
2. The machine can be moved by pushing down the
OFF end lever q.
3. Loosen the nut e and turn the adjusting screw
r to adjust the height of the base.
e
NOTE:
After adjusting, securely tighten the nut e.
r
w
3
2. PREPARATION
BAS-705