Sewing; Replacing Needle - Brother BAS-705 Instruction Manual

4. SEWING

4. SEWING

4-1. Replacing needle

Turn off the power switch before installing the needle, otherwise the machine may operate of the
start switch is depressed by mistake and serious injury could result.
1. To install the needle q for the first bar tacking, loosen the set screw w, insert the needle q as far as it will go
so that the long groove is facing toward you (side A), and then tighten the set screw w.
2. To install the needle e for the second bar tacking, loosen the set screw , insert the needle e as far as it will
go so that the groove is facing away from you (side A), and then tighten the set screw r.
e
CAUTION
w
r
A
24
q
BAS-705