Brother BAS-705 Instruction Manual page 50

Set home position
Press the start switch
needle down position
!3
!4
5. STANDARD ADJUSTMENT (MACHINE HEAD)
Adjusting the presser foot
11. Turn on the power and then press the START switch
to determine the home position.
12. Loosen the screw !4 of the presser set arm !3 , and
then move the presser set arm ! 3 to the left or right
!5 to adjust so that the needle down position is in the
center of the oval hole in the presser foot !5 at the
second bar tacking.
13. Remove the needle hole jig and install the needle.
47
BAS-705