Using Ieee802.1X Authentication; Tcp/Ip Settings; Installation Of The Client Certificate - Konica Minolta bizhub 751 User Manual

Setup items by operation
1.43

Using IEEE802.1X authentication

If you use this machine in a wired LAN environment having the IEEE802.1x authentication system, you must
configure the authentication client function of this machine.
Using IEEE802.1x authentication can restrict any device not permitted by the administrator to connect to this
LAN environment. Configure settings to fit your environment.
Use the following flowchart to configure settings.
1.43.1

TCP/IP Settings

Configure settings to use this machine in the TCP/IP network environment.
For details, refer to
1.43.2

Installation of the client certificate

Install the client certificate of this machine according to the EAP authentication method to be used.
- When EAP-Type is [EAP-TLS], the installation of the client certificate is indispensable.
- When EAP-Type is [EAP-TTLS] or [PEAP], the client certificate is required to be installed depending on
how the machine is used.
For details of the installation of the client certificate, refer to
SSL-based communication" on page
751/601
TCP/IP Settings
Installation of the client certifi-
Installation of CA Certificate
IEEE802.1x Authentication Set-
Action for Invalid Certificate
IEEE802.1X Authentication Trial
Finish
"Specifying general settings for TCP/IP-based communication" on page
1-8.
cate
ting
"Creating a certificate for this machine for
1
1-2.
1-131