Sending An Internet Fax; Tcp/Ip Settings; Internet Fax Function - Konica Minolta bizhub 751 User Manual

Setup items by operation
1.15

Sending an Internet fax

Specify settings for sending an Internet fax.
In order to use the Internet fax function, this machine is required to be equipped optionally with a hard disk
and an image controller. And when using the Internet fax function, settings by a service engineer are required.
For details, contact your service representative.
The Internet fax function sends and receives scanned originals as an attached file (TIFF format) via the
intranet or Internet. This via-intranet or -Internet communication largely reduces the communication cost as
compared with general fax messages.
Communication by combining POP before SMTP, APOP, SMTP authentication or encryption using SSL/TLS
is available. For details, refer to
Specify the settings according to the following flowchart.
Communicate with the SMTP
server using SSL/TLS?
Yes
SMTP over SSL/Start TLS
Note
For details on registering Internet fax addresses, refer to
destination" on page
For details on the Internet fax operation, refer to the User's Guide [Network Scan/Fax/Network Fax
Operations].
751/601
"Sending scan data by E-mail" on page

TCP/IP Settings

Internet Fax Function

Regist machine informa-
tion
Header Information
E-mail TX (SMTP)
I-Fax Advanced Setting
SMTP Authentication?
No Yes
SMTP Authentication
Finish
1-168.
1-25.
POP before SMTP?
No Yes
POP before SMTP
➀ POP over SSL?
➁ APOP?
No Yes
➀ POP over SSL
➁ APOP Authentication
"Registering or editing an address book
1
No
1-49