Sending Scan Data To A Windows Computer; Tcp/Ip Settings - Konica Minolta bizhub 751 User Manual

Setup items by operation
1.8

Sending scan data to a Windows computer

Specify settings for sending scan data to a Windows computer.
Scan data can be sent directly to a computer specified on the network. In order to perform a Scan to PC
(SMB) operation, first specify shared file settings in Windows on the computer receiving the data.
This machine supports the direct hosting service. To send data in the IPv6 environment, the Direct Hosting
setting must be enabled. When the Direct Hosting setting is enabled, the destination computer can be
specified using the IPv6 address or the computer (host) name. When the destination is specified with the
computer (host) name, this machine uses the DNS server to acquire the IPv6 address.
To specify a computer on another network using Windows name (NetBIOS name), a WINS server must be
used.
Specify the settings according to the following flowchart.
Use the WINS server?
WINS Setting
Note
For details on registering SMB addresses, refer to
destination" on page
For details on the SMB-based file transmission, refer to the User's Guide [Network Scan/Fax/Network
Fax Operations].
1.8.1

TCP/IP Settings

Specify settings to use this machine in a TCP/IP network environment.
To send data in the IPv6 environment, the Direct Hosting setting must be enabled. To specify the destination
computer with the computer (host) name, prepare a DNS server and be sure to specify the DNS settings of
this machine correctly.
For details, refer to
751/601
No
Yes No
1-168.
"Specifying general settings for TCP/IP-based communication" on page
TCP/IP Settings
Client Setting
IPv6 environment?
Finish
"Registering or editing an address book
1
Yes
Direct Hosting Setting
1-2.
1-21