Konica Minolta bizhub 751 User Manual page 175

Setup items by operation
When "Bulletin Board User Box" is selected
Item
User Box Number
User Box Name
Type
Auto Delete Document
When "Relay User Box" is selected
Item
User Box Number
User Box Name
Relay Address
Relay TX Password
Retype Relay TX Pass-
word
When "Annotation User Box" is selected
Item
User Box Number
User Box Name
Auto Delete Document
Count Up
Stamp Elements
!
Detail
If "Password Rules" is enabled, no password containing less than eight characters can be registered.
If you have already registered a user password containing less than eight characters, change it to one
using eight characters before enabling "Password Rules". For details on the password rules, refer to
the User's Guide [Copy Operations].
751/601
Definition
Specify the registration number of the box to be created ("Use opening number" or "Direct
Input").
Specify the user box name (up to 20 characters).
To specify the user box password, select the "Use Box Password" check box, and then
specify the password (up to 8 characters).
Specify the user box type. Public user boxes can be created only, and they cannot be
changed in Administrator mode.
Specify the period during which data in the user box is saved.
Definition
Specify the registration number of the box to be created ("Use opening number" or "Direct
Input").
Specify the user box name (up to 20 characters).
To specify the user box password, select the "Use Box Password" check box, and then
specify the password (up to 8 characters).
Specify the relay address.
Specify the relay TX password (up to 8 characters).
Type in the relay TX password again.
Definition
Specify the registration number of the box to be created ("Use opening number" or "Direct
Input").
Specify the user box name (up to 20 characters).
To specify the user box password, select the "Use Box Password" check box, and then
specify the password (up to 8 characters).
Specify the period during which data in the user box is saved.
Select the counting method. If the user box contains documents, the setting cannot be
specified.
Specify settings for "Primary Field", "Secondary Field", "Date/Time Setting", "Print Posi-
tion", "Density", and "Number Type"
1
1-162