Setup items by operation
1.15.5
E-mail TX (SMTP)
Specify settings for sending messages.
For details, refer to
1.15.6
I-Fax Advanced Setting
In Administrator mode of PageScope Web Connection, select the Network tab - "E-mail Setting" - "I-FAX
Advanced Setting".
Specify the following settings.
!
Detail
If the Internet fax function is disabled, this menu item is not displayed.
Item
MDN Request
DSN Request
MDN/DSN Response
Observation Time
Maximum Resolution
1.15.7
SMTP over SSL/Start TLS
Specify the settings for SMTP over SSL/Start TLS.
For details, refer to
751/601
"E-mail TX (SMTP)" on page
Definition
Select "ON".
If the fax is printed at the receiving side, MDN response can
be received.
Select "ON".
If the fax reaches the mail server at the receiving side, DSN
response can be received.
If MDN is specified to "ON", DSN is not required.
Specify the waiting time for MDN or DSN response.
MDN or DSN response of which set waiting time was up is
ignored.
Specify the maximum resolution.
"SMTP over SSL/Start TLS" on page
1-26.
1-28.
1
Prior confirmation
1-54