Barcode Sizes - Xerox 4110 User Manual

Barcode sizes

Barcodes
type
JAN (standard)
JAN (short version)
Code 39
NW7
Code 128
ITF
(without bearer bar)
ITF
(with bearer bar)
Customer Barcode
X er o x 4 110 /4 5 90 P o s tS c r i p t Us e r G ui d e
The table below lists formulae for calculating the approximate
dimensions of printed barcodes.
The dimensions of the barcode printed may vary, even when using
the same program, depending on conditions such as the
characteristics and resolution of the printer used, paper quality,
and so forth. The dimensions derived from the formulae in this
table are not guaranteed to be the actual dimensions of the printed
barcodes. Use this table as a reference when estimating the size
of printed barcodes.
Width
P × 0.502
Side margins not included.
P × 0.354
Side margins not included.
P × (C + 2) × 0.106
Inter character gap of the left and right
sides not included.
"C" includes the checkdigit.
P × (C1 × 0.132 + C2 × 0.148 − 0.026)
Inter character gap of the left and right
sides not included.
"C1" and "C2" include the checkdigit.
P × (C × 0.081 + 0.096)
Formula for CODE C.
P × ((C/2 × 0.175) +0.093)
Quiet zone not included.
"C" includes the checkdigit.
P × ((C/2 × 0.137) + 0.323)
Bearer bar and quiet zone included.
"C" includes the checkdigit.
P × 7.297
Spaces before the black bar of START
code and after the black bar of the STOP
code are not included.
P: Font size (point)
C: Number of characters
C1: Number of characters (0,1,2,3,4,5,6,7,8,9,-,$)
C2: Number of characters (:,/,.,+,A,B,C,D)
6. B a r c od e S e tt in g s
Formulae
Height
P × 0.352
Indicates the height of the guard bar.
P × 0.352
Indicates the height of the guard bar.
P × 0.352
P × 0.352
P × 0.352
P × 0.352
P × 0.352
Bearer bar included.
P × 0.342
Indicates the height of the long bar.
6-13