Xerox 4110 User Manual page 82

4. W i n do w s 2 00 0 /X P a n d W i nd ow s S e r v e r 2 00 3
High Capacity Feeder
Hole Punch
Tri-Folding Output Tray
Booklet Output Tray
Paper Size Settings
Switch Paper Size (8K/16K)
4- 1 2
Settings
Select "Available" if the High Capacity Feeder has been installed.
Specify the number of holes to punch on the paper. Select from "2
Holes/4 Holes" or "2 Holes/3 Holes."
Select "Available" if the Tri-Fold Output Tray is installed.
Select "Available" if the Booklet Tray is installed.
Specify the paper size group for different locales to enable the
selection of paper sizes common to that locale. The following
groups of paper size categorized by locale are available: "AB
Series," "AB Series (8K / 16K)," "AB Series
(8 x 13")," "AB Series (8 x 13" / 8 x 14")," and "Inch Series." As the
paper size settings will be set automatically in accordance with the
relevant locale, it is usually not necessary to change this setting.
Indicate your language preference to enable the set of 8K and 16K
paper sizes that is best suited to your needs. If you select
"Traditional Chinese," the dimensions of the 8K and 16K paper
sizes are 267 x 388mm and 194 x 267mm respectively. If you
select "Simplified Chinese," the dimensions will be 270 x 390mm
and 195 x 270mm respectively.
NOTE: If "AB Series (8K/16K)" is not selected in "Paper Size
Settings," both sets of 8K and 16K paper sizes will not be
available despite the setting specified here.
X e r o x 4 11 0/ 4 59 0 P os t S c r i pt U s er G ui d e