Xerox 4110 User Manual page 113

Image Enhancement
Draft Mode
Custom Paper Auto
Orientation
Substitute Tray
Print Mixed Size Originals
X er o x 4 110 /4 5 90 P o s tS c r i p t Us e r G ui d e
Specifies whether or not to use the Image Enhancement function.
Selecting [On] smooths out boundaries when printing. This
reduces jagged edges by artificially increasing the resolution of
the image. When printing a bitmapped image composed of
coarse halftone dots, smooth color or grayscale gradation is
impossible in certain situations. In this case, select [Off].
Specifies whether or not to reduce the amount of toner used when
printing drafts. When [On] is selected, the overall printed page
becomes lighter. This is best for printing documents when high
print quality is not necessary.
Specifies whether or not to correct the orientation of the custom
paper.
Specifies what action to take when the paper for the print size is
not loaded in the machine.
• Use Printer Settings - Use the printer settings. The settings
can be confirmed on the control panel.
• Display Message - Display paper supply messages on the
control panel. Printing is impossible until paper is supplied.
• Use Nearest Size (Adjust to Fit) - Selects the nearest paper
size and automatically adjusts the image size as necessary.
• Use Nearest Size (No Zoom) - Selects the nearest paper size
and prints the same size as the image.
• Use Larger Size (Adjust to Fit) - Selects paper larger than
the original and automatically adjusts the image size as
necessary.
• Use Larger Size (No Zoom) - Selects paper larger than the
original and prints the same size as the image.
• Feed from Bypass Tray - Feed from bypass tray.
Controls the orientation of the second-side image when printing
double-sided.
5 . M ac i n to s h c om p ut e r s
5-17