Xerox 4110 User Manual page 112

5. M a c i nt os h c o m pu t er s
Folding
Double Print
Booklet Creation
Output Size for Booklet
Creation
Booklet Subsets
Skip Blank Pages
Bypass Feed Orientation
Paper Type/Media
Output Destination
Print Mode
Halftone
5- 1 6
Select the folding method.
Enable this feature to repeatedly print one page twice on a paper
with a bigger size than the original. You can use Double Print
feature if you have set the zoom ratio to 100% with the following
paper size and output size settings.
• Paper Size
• A4
• A5
• B5
• Folio (8.5 x 11")
Specify the assembling and finishing methods for booklet
creation. You can check the result of the change in setting on the
preview image at the top right of the screen.
Specify the output size for booklet creation printing.
Specify the number of sheets in each subset when printing booklet
in subsets. Select from "None," or "Every Sheet" to "Every 20
Sheets."
Specify whether to skip blank pages when printing documents that
consist of blank pages.
Specifies the paper orientation when printing from the bypass
tray. When feeding the short edge of the paper first, select
[Landscape]. When feeding the long edge of the paper, select
[Portrait].
Select the paper type to be used for printing.
Select the paper output destination.
Specifies whether to give priority to the print speed or the image
quality.
Select the halftone settings for printing.
• Select [Fine Dots] for the small size halftone dot commonly
used in PostScript.
• Select [Thick Dots] for coarser dots than the Fine Dots setting.
• Select [Type 3] for the same halftone setting that is used in
PCL.
X e r o x 4 11 0/ 4 59 0 P os t S c r i pt U s er G ui d e
• Output Size
• A3
• A4
• B4
• Ledger (11 x 17")