Xerox 4110 User Manual page 39

Booklet Subsets
Skip Blank Pages
Bypass Feed Orientation
Print Mode
Halftone
Image Enhancement
Draft Mode
Custom Paper Auto
Orientation
X er o x 4 110 /4 5 90 P o s tS c r i p t Us e r G ui d e
Specify the number of sheets in each subset when printing booklet
in subsets. Select from "None," or "Every Sheet" to "Every "20
Sheets."
Specify whether to skip blank pages when printing documents that
consist of blank pages.
Specifies the paper orientation when printing from the bypass tray.
When feeding the short edge of the paper first, select
[Landscape]. When feeding the long edge of the paper, select
[Portrait].
Specifies whether to give priority to the print speed or the image
quality.
Select the halftone settings for printing.
• Select [Fine Dots] for the small size halftone dot commonly
used in PostScript.
• Select [Thick Dots] for coarser dots than the Fine Dots setting.
• Select [Type 3] for the same halftone setting that is used in
PCL.
Specifies whether or not to use the Image Enhancement function.
Selecting [On] smooths out boundaries when printing. This
reduces jagged edges by artificially increasing the resolution of
the image. When printing a bitmapped image composed of coarse
halftone dots, smooth color or grayscale gradation is impossible in
certain situations. In this case, select [Off].
Specifies whether or not to reduce the amount of toner used when
printing drafts. When [On] is selected, the overall print becomes
lighter. This is best for printing documents when high print quality
is not necessary.
Specifies whether or not to correct the orientation of the custom
paper.
2 . W i nd ow s M e
2-11