Xerox 4110 User Manual page 115

Job Type
User ID
Password
Retrieve Document Name
Document Name
Start Print Time
X er o x 4 110 /4 5 90 P o s tS c r i p t Us e r G ui d e
Settings
You can specify the print function for Secure Print, Sample Print,
and Delayed Print.
• Secure Print temporarily stores print jobs in the printer, and
then prints them when print instructions are received from the
control panel.
• Sample Print outputs only one copy when multiple copies are
specified. If there is no problem, the remaining sets can be
printed.
• Delayed Print temporarily stores print jobs in the printer, and
then prints them at the scheduled time.
To use the Secure Print or Sample Print feature, input the User ID
and password for Print Type. The password entered appears as
bullets (!).
• Normal Print - Select when you do not want to output
secure prints, sample prints, or delayed prints.
• Secure Print - Select when you want to output secure
prints.
• Sample Print - Select when you want to output sample
prints.
• Delayed Print - Select when you want to output delayed
prints.
See the Online Help for details on the operation of the printer.
Enter the User ID for Secure Print or Sample Print.
Enter the password for Secure Print. Each digit entered appears
as a bullet (!).
Select the method for specifying the document name. If you have
selected Auto Retrieve, the valid document name can be up to 24
alphanumeric characters.
When "Enter Document Name" is selected in the Retrieve
Document Name list, a document name up to 24 alphanumeric
characters can be specified.
Specifies the time when a Delayed Print job will be printed. Place
the cursor in the hour or minute box and press the up or down
triangle to specify the start time. You can also set the time by
entering the time directly into the boxes. The default setting is
00:00.
5 . M ac i n to s h c om p ut e r s
5-19