Level 2 Interface Configuration Commands - Watchguard V10 Command Line Interface Manual

CHAPTER 3: Configuration Mode Commands
Option
<ascii_key
|%hex_key>]
[-position
<number>]
Example

Level 2 interface configuration commands

Enter system interface configuration mode
WG#config<ENTER>
WG(config)#interface<ENTER>
Effect
Arguments
show command (configure interface level)
WG#config<ENTER>
WG(config)#interface<ENTER>
WG(config-if)#show
82
Description
the pre-shared key, if one is used by
this policy. You must enter the actual key text as
either ASCII text or hexadecimal notation.
This argument records the numeric
position assigned to this policy in the IKE policy
table.
WG(config-ike)#policy "Remote Users" * -
action \
remote_users -peer -domain
WatchGuard.com \
-user_domain WatchGuard.com -local
{20001 domain}
WG(config-ike)#policy IKE_NY_SJ
NY_Gateway \
-action psk_main -peer any -preshared \
"secret"<ENTER>
Enters the system interface configuration mode.
None. Please review the rest of this section for
related commands.
WatchGuard Vclass 5.1