Using Keywords - Watchguard V10 Command Line Interface Manual

Arguments
Example
top command
WG(admin)#top
Effect
Arguments
Example

Using keywords

The CLI provides keywords such as enable, disable, and
no that perform specific functions with system parameters.
For example, enable and disable are used to enable and
disable existing configurations such as policy schedules
and system QoS settings. The following example shows an
existing schedule configuration named "24_7_Schedule"
being enabled:
WG(config)#schedule 24_7_Schedule
enable <ENTER>
The keyword no functions as a simple "on/off" switch for
configuration components, as shown in the following
example:
WG(config)#denial_of_service no -
pingofdeath <ENTER>
WatchGuard Command Line Interface Guide
Getting started with the WatchGuard CLI
None.
WG(admin)#exit<ENTER>
Immediately returns to the top level of the
WatchGuard CLI (the "WG#" prompt) from
whatever level of CLI you are using.
None.
WG(admin)#top<ENTER>
# As a result, the WG# prompt is displayed.
15