Debug Mode
CHAPTER 4
Commands
All WatchGuard CLI commands are organized into
groups, which are presented as specific command
modes. This chapter covers the commands available in
Debug Mode.
Debugging/troubleshooting commands
The CLI Debug commands, detailed here, enable the
use of standard Linux commands such as ping, tcp-
dump, netstat, traceroute, and arp. Most commands
such as "netstat," "arp," "ping," "tcpdump," and
"traceroute" are similar to those provided on UNIX,
Solaris and Linux systems. You can use these com-
mands to troubleshoot network environments.
Debugging configuration information is not saved
when the database is backed up or exported to an
XML profile. Debuggging commands are available
only for runtime debugging purposes.
WatchGuard Command Line Interface Guide
127