Interface Configuration - Watchguard V10 User Manual

Interface Configuration

The Interface tab is used to make changes to the IP
addresses and subnet masks of the interfaces. Different
combinations of interfaces are displayed according to the
model of Firebox Vclass appliance you are configuring. In
addition, Interfaces appear differently depending on
whether the appliance is deployed in Router Mode or
Transparent Mode.
In Transparent Mode, the System IP and System Mask are
set from the main Interface window. This IP applies to all
interfaces on the appliance. The only configuration items you
can change for specific interfaces are MTU size and Link
Speed.
• Click the Interface tab.
The Interface settings are displayed. In this example, the
interfaces for the V60 and V80 models are shown.
Firebox Vclass User Guide
Interface Configuration
N
OTE
93