Log Command - Watchguard V10 Command Line Interface Manual

CHAPTER 3: Configuration Mode Commands
Effect
Arguments
See Also

log command

no command (log level)
WG#config<ENTER>
WG(config)#log<ENTER>
WG(config-log)#no
<event|remote_log_server|traffic>
Effect
Arguments
Example
clear all command (log level)
WG#config<ENTER>
WG(config)#log<ENTER>
WG(config-log)#no
<event|remote_log_server|traffic>
Effect
50
Enters license parameter configuration mode, at
which point you can enter license-specific
commands and their arguments.
None in this mode.
For more information about "license" mode
commands, see "Level 2 license commands (for
upgraded or additional features)" on page 117.
Disables logging for the specified log.
None
WG#config<ENTER>
WG(config)#log<ENTER>
WG(config-log)#no traffic
Clears all logs.
WatchGuard Vclass 5.1