Page 3
By installing or using the SOFTWARE PRODUCT you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this AGREEMENT, WATCHGUARD will not license the SOFTWARE PRODUCT to you, and you will not have any rights in the SOFTWARE PRODUCT. In that case, promptly return the SOFTWARE PRODUCT, along with proof of payment, to the authorized dealer from whom you obtained the SOFTWARE PRODUCT for a full refund of the price you paid.
Page 4
AGREEMENT. You must also maintain a current subscription to the WatchGuard LiveSecurity Service (or its equivalent) for each additional WATCHGUARD hardware product on which you will use a copy of an updated or modified version of the SOFTWARE PRODUCT received through the WatchGuard LiveSecurity Service (or its equivalent).
Page 5
FOR SUCH PRODUCT. THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF AN AGREED REMEDY. IN NO EVENT WILL WATCHGUARD BE LIABLE TO YOU OR ANY THIRD PARTY, WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED...
Hardware Descriptions CHAPTER 1 This chapter provides a visual tour of the external hardware features of the WatchGuard® Firebox® Vclass security appliances, focusing on the buttons, LEDs, interfaces, ports, and outlets for the following models: • Firebox V10 • Firebox V60 •...
• A kit containing rack-mounting hardware for this appliance • A CD containing the WatchGuard Vcontroller application software for use with three different operating systems: Windows 9x/2000/XP, Solaris, and Linux. The CD also provides electronic versions of the complete user documentation set.
Front and Back Views The V10 model The front panel of a Firebox V10 appliance contains the indicators shown in the following illustration. The LEDs on the front panel are as follows: Power Illuminates when the appliance has been turned on.
Page 12
Console interface A single RJ-45 interface, labeled Console, permits a direct workstation-to-appliance connection. You can use the WatchGuard Command Line Interface (CLI) to configure and administer this appliance. For more information about this administrative option, see the CLI Guide. 5Vdc3.0A power interface This interface serves as the connection to a 100VAC-to-240VAC (50/60Hz) source.
Page 13
System Administration Guide. Admin Illuminates when a system administrator is connected to the appliance by means of the Vcontroller or the WatchGuard CLI. Ready Blinks when the appliance is powering up. Illuminates when the appliance is ready for network traffic.
Page 14
Console interface A single RJ-45 interface, labeled Console, permits a direct workstation-to-appliance connection. You can use the WatchGuard Command Line Interface (CLI) to configure and administer this appliance. For more information about this administrative option, see the CLI Guide. Reset port This opening allows you to insert a straight pin or paperclip and press an internal reset switch that restarts the appliance.
Page 15
UPS devices from American Power Company (APC) are currently supported by the Firebox Vclass power management firmware. Check the WatchGuard Web site (www.watchguard.com) for updated information on complete UPS support. In the event of a power failure, this security appliance, if left connected to the power source, will automatically restart itself after electrical power has been restored.
Page 16
Blinks when the appliance is powering up or powering down. It is steadily lit when the appliance is ready for network traffic. Gigabit interfaces Two Gigabit Ethernet interfaces, labeled 0 and 1 (corresponding to Private and Public), act as the primary conduits through which WatchGuard Firebox Vclass...
Page 17
A single RJ-45 interface, labelled Console, supports a direct workstation-to-appliance connection. You can use the WatchGuard Command Line Interface (CLI) to administer and test this appliance. To learn more about this administrative option, see the CLI User Guide included on the installer CD.
Page 18
UPS devices from American Power Company (APC) are currently supported by the Firebox Vclass power management firmware. Check the WatchGuard Web site (www.watchguard.com) for updated information on complete UPS support. WatchGuard Firebox Vclass...
WatchGuard Firebox Vclass administrative client applications The WatchGuard Vcontroller (or the companion WatchGuard CPM client software) gives you full control of all the customizable operating system parameters, including basic system configurations, security policies, maintenance, and activity logging.
Page 20
(0, 1, etc.): 0 = Private 1 = Public2 = DMZ Where other interfaces are included (a second DMZ or High Availability), the corresponding interface numbering will be noted at that time. Public , and (where available) or with the standard interface WatchGuard Firebox Vclass...