Manual Configuration - Watchguard SOHO 6 Wireless Installation Procedures Manual

The DHCP Client
The default configuration of the SOHO 6 Wireless is set to receive the external IP address information
using DHCP. If your ISP supports this method, the SOHO 6 Wireless receives the information when it
reboots and connects to the Internet. The SOHO 6 Wireless does not require any additional
configuration.
Your installation is now complete and you should be able to use your Internet connection. Verify this by
accessing the Internet.

Manual Configuration

If your ISP assigns static IP addresses, you must enter the TCP/IP settings into the SOHO 6 Wireless
manually.
From the Configuration Mode drop list, select Manual Configuration.
1
The Manual Configuration page appears.
2 Type the TCP/IP settings you recorded from your computer during the installation process, see
"Examine and record your current TCP/IP settings".
3 Click Submit.
Your installation is now complete, and you should be able to use your Internet connection. Verify this by
accessing the Internet.
The PPPoE Client
If your ISP assigns IP addresses using PPPoE, your PPPoE login name and password are required to
configure the SOHO 6 Wireless.
1 From the Configuration Mode drop list, select PPPoE Client.
The PPPoE Client configuration page appears.
2 Type the PPPoE login name and password supplied by your ISP.
SOHO 6 Wireless Installation Procedures: Windows XP with Internet Explorer 5.x & 6.0
Configure the External Network of the SOHO 6 Wireless
6