Interface Command; Ipsec Command; License Command - Watchguard V10 Command Line Interface Manual

interface command

WG#config<ENTER>
WG(config)#interface
Effect
Arguments
See Also

ipsec command

WG#config<ENTER>
WG(config)#ipsec
Effect
Arguments
See Also

license command

WG#config<ENTER>
WG(config)#license
WatchGuard Command Line Interface Guide
Top-level configuration mode commands
Enters the system interface configuration mode, at
which point you can enter interface-specific
commands and their arguments.
None in this mode.
See "Level 2 interface configuration commands" on
page 82 for details on specific "interface" mode
commands.
Enters the IPSec configuration mode, at which
point you can enter IPSec action- and proposal-
specific commands and their arguments.
None in this mode.
For more information about "IPSec" mode
commands, see "Level 2 IPSec configuration
commands" on page 95.
49