Linksys SPA9000-NA Installation And Configuration Manual page 48

1 . Start Internet Explorer, and then enter the IP address of the SPA9000 . Click
then click Advanced .
Voice tab > Line 1 .
2 . Click
NOTE:
Any line can be used for ITSP service . However, for simplicity and consistency throughout
this Install Guide, Line 1 is used for this purpose .
3 . Enter the account information for your ITSP account:
User ID: The account number or logon name for your ITSP account (often the same as the
–
phone number)
Password: The password for your ITSP account
–
Proxy: The proxy server for your ITSP account
–
Use the following illustration as a guide .
NOTES:
SIP Port:
You can keep the default value of 5060 for Line 1 . Each line must have a unique SIP
–
port .
Contact List:
Leave the default value, aa, for the Auto Attendant . Later, you can make
–
changes . Using this basic setting at this point simplifies your testing and verification of the
configuration .
Submit All Changes button . The SPA9000 device reboots .
4 . Click the
Linksys Voice System Installation and Configuration Guide
Configuring Phone Service and Voice Mail
Configuring the SPA9000
Admin Login and
47