12 .
Continue as needed for the other devices in your LVS:
SPA400
–
a .
Click
Choose A Product in the left navigation pane .
b .
On the
Choose A Product page, choose IP PBX from the Voice over IP (VoIP) drop-down list .
c .
Choose
SPA4000 on the Choose The Device page .
d .
On the SPA400 page, choose the
e .
Choose the version in the drop-down list .
f .
Under
Firmware, click the link for the latest version of the firmware .
g .
Save the file .
SPA9xx IP Phones
–
Choose A Product in the left navigation pane .
a .
Click
Choose A Product page, choose VoIP Phones from the Voice over IP (VoIP) drop-
b .
On the
down list .
c .
On the
Choose The Device page, scroll down to the end of the page . Choose the correct
model from the drop-down list for the SPA9xx phones .
NOTE:
There are separate drop-down lists for the SPA962 and the SPA932 .
d .
On the SPA400 page, choose the
e .
Choose the version in the drop-down list .
f .
Under
Firmware, click the link for the latest version of the firmware .
g .
Save the file .
NOTE:
You will install the firmware after connecting the devices .
Linksys Voice System Installation and Configuration Guide
Downloading Firmware
Click Here link under Downloads .
Click Here link under Downloads .
Preparation
27